|
3410 |
Click on the above
image for a full
view ... |
|
| A heavy-duty pole mounting speaker stand which has been designed to be recessed in a speaker cabinet. This system is intended for use with PA and mobile disco speakers which need to be transported often and set up quickly. In particular, it is suitable for our GL23A, GL24B and XB28F cabinets which already have a hole part-drilled for this purpose. To fit, a 44mm diameter hole is drilled in the bottom of the cabinet, the top hat is inserted and its flange is secured in place by 4 screws (9mm holes being provided for this purpose). A 105mm long 'hollow' with a diameter of 35mm is then available which will safely accommodate poles or tripods of between 25mm and 33mm in diameter. The maximum weight that the overall support system can carry is limited by the stand used and the cabinet. However, it must not exceed 150kg. The top hat is made from steel, weighs 380g and is black in colour. The flange, which is 3mm tall and 110mm in diameter, could be flush-mounted on the cabinet bottom if a suitable recess is provided. Overall height: 115mm. Mounting: 4 equally spaced 9mm holes on an 80mm PCD. |
|
